Difference between revisions of "CSC231 2010 Julia"
|Line 20:||Line 20:|
==Sound and video==
==Sound and video==
Revision as of 00:08, 18 September 2010
PC demolition report
For this lab, as a class we deconstructed a Dell desktop PC and removed its parts. The purpose of the lab was to familiarize ourselves with the workings of a personal computer to begin our study of microprocessors and assembly language. When studying assembly language it is very important to understand what is going on in a computer at the physical level; this is the main difference between the study of assembly language and higher-level languages. More specifically, we wanted to get an idea of what the processor and the memory of the computer look like in real life, since we will be dealing with them throughout the semester.
Parts of the Computer
The central processing unit, also known as the CPU or the processor, of a computer is the part that reads, interprets, and executes the instructions of a program. When we write in assembly language, we are sending instructions to the processor directly. The instructions must be very basic for the processor to understand them, this is why assembly programs are written in more elementary steps than programs in higher-level languages. The operating frequency of a CPU is a large factor in determining the efficiency of the computer; Modern CPUs run at operating frequencies exceeding 3 GHz. A common CPU model is the MOS 6502.
Random-access memory or RAM is a system of integrated circuits where the computer's data is stored. RAM is held on removable cards, which makes it simple to add RAM to a computer when in need of more memory. A typical desktop computer might have 2GB of RAM, but many specialized computers have more. The advantage of RAM as opposed to a hard disk is that the memory of the RAM is very quick to access, both reading and writing. Thus, a machine with more RAM will be able to do data operations more quickly.
The power supply of a computer converts 120 V AC wall power to DC power for the computer. Typical output voltages range from 3.3 to 12 V. A modern computer's power supply might supply 750 W of power to the computer to run the digital circuits as well as the disk drives and the fans.
A hard disk drive, also known as a hard disk or HCC, is where the bulk of the computer's data is stored. Data is stored magnetically on a rotating platter powered by a motor and read by a special read/write arm above the platter. Modern hard disks can exceed 1 TB, although sizes from 50-80 GB are more common. Desktop computers' hard drives are generally 3.5 inches in diameter, while laptops are 2.5 inches.
The hard drive generates the most waste heat of any part of the computer. Due to this, it is often cooled by a heat sink. A heat sink extends the surface area of materials in contact with the heat, and uses fans to disperse it. Most heat sinks are made of aluminum.