Week 6- SolidWorks

From CSclasswiki
Jump to: navigation, search

Kaitlin and Becca's Documentation

This week we had to figure out how to cut the Sundial into pieces for printing. We found that the easiest way to cut the disk is to make a box in sketch mode over the part of the Sundial you want to cut off. Switch to features mode, select the sketch from the menu on the left and click on extruded cut. The box will be subtracted from the disk, leaving the piece that we wanted to print.


For this week I wanted to try working on something else so I worked on the letters on the edges of the sundial. Week6 1.png

I finally got the bird to mirror! Week6 2.png

Here's what was completed for this week: Week6 3.png